Status of QEG Build Morocco: Build Day 3 - Initial Resonance Achieved! (Video)
Watching this video was quite an experience. It’s perhaps because I’ve been following this topic for so many years now and amidst all the doubt and negativity from mainstream science, amazing scientists have put together devices that time and time again show that our current understandings of science and physics can use some updating.
To begin, I want to define what I mean when I say ‘free energy.’ I refer to it as getting more energy out than you put in and/or not requiring input and having energy be produced perpetually. To answer the question, yes this device will need part replacement, bearing, belts etc. at some point in its lifespan. Minimal costs involved there.
For a moment, forget about suppression of these technologies and simply focus on the fact that they are here, working and will eventually hit the mainstream for people to build and purchase themselves.
If you haven’t heard of the QEG (Quantum Energy Generator) then this is going to be a nice surprise for you. This device is based off of Tesla’s work where he built a resonance generator that required 1KW input to produce 10KW output. This device works in the same way and was built after his patents were released into the public domain. Years of testing and adjusting was done to make the device possible and available for others to build. This new device will require 1KW of input power to get the core resonance up and then after it is producing 10KW it can be unplugged and an inverter is attached so no input power will be required.
Yes, this means what it is saying, after a short period of input power, NO INPUT will be needed to supply 10KW of power. As stated by HopeGirl who released the plans open source to the public “The QEG belongs to humanity now. Many will make further improvements and we will all co-develop this practical bridge technology together.” Beautiful words as this world doesn’t need to be built off of money, greed, patents, ownership and power. These are archaic egoic concepts that we can evolve out of quite effortlessly.
Have a look at the moving video below as this community in Morocco built the working device in only 3 days. This video is of them turning on the device for the first time. You are seeing just the beginning of this device as more tweaks will be made in the coming days to increase the output power.
Early this morning the QEG Build team here in Morocco successfully got resonance! No hard data to reveal yet but we maintained five 100 Watt Light Bulbs for several minutes.
We will begin to tune the QEG so that we can start increasing the power output. Jamie was surprised that no major tweaking was needed after the first assembly.
We took the day off on Sunday and relaxed after the team spent nearly the whole day on Saturday assembling the QEG. After dinner, Jamie decided to do the prep work for testing her out.
There was a large gathering of people huddled inside the small garage as the work unfolded. It felt like waiting outside a delivery room, when Jamie would announce we are ready for testing everyone would gather to watch. There were so many tablets and cell phones recording the scene that those in the back of the garage had multiple perspectives to watch and see up close.
When we finally pushed her to resonance the first time the entire room began to chant the tone the QEG was making. After the QEG achieved Resonance several Orbs were captured by people taking photos and Hans was able to capture some amazing footage of Orbs on video, which will be uploaded as soon as possible.
Heres a short clip of the Aouchtam team achieving resonance for the first time, job well done!
Read More: http://sitsshow.blogspot.com/2014/04/status-of-qeg-build-morocco-build-day-3.html
http://www.collective-evolution.com/2014/04/30/free-energy-live-in-action-this-is-breathtaking-as-science-is-being-re-written/
//////////
Watching this video was quite an experience. It’s perhaps because I’ve been following this topic for so many years now and amidst all the doubt and negativity from mainstream science, amazing scientists have put together devices that time and time again show that our current understandings of science and physics can use some updating.
To begin, I want to define what I mean when I say ‘free energy.’ I refer to it as getting more energy out than you put in and/or not requiring input and having energy be produced perpetually. To answer the question, yes this device will need part replacement, bearing, belts etc. at some point in its lifespan. Minimal costs involved there.
For a moment, forget about suppression of these technologies and simply focus on the fact that they are here, working and will eventually hit the mainstream for people to build and purchase themselves.
If you haven’t heard of the QEG (Quantum Energy Generator) then this is going to be a nice surprise for you. This device is based off of Tesla’s work where he built a resonance generator that required 1KW input to produce 10KW output. This device works in the same way and was built after his patents were released into the public domain. Years of testing and adjusting was done to make the device possible and available for others to build. This new device will require 1KW of input power to get the core resonance up and then after it is producing 10KW it can be unplugged and an inverter is attached so no input power will be required.
Yes, this means what it is saying, after a short period of input power, NO INPUT will be needed to supply 10KW of power. As stated by HopeGirl who released the plans open source to the public “The QEG belongs to humanity now. Many will make further improvements and we will all co-develop this practical bridge technology together.” Beautiful words as this world doesn’t need to be built off of money, greed, patents, ownership and power. These are archaic egoic concepts that we can evolve out of quite effortlessly.
Have a look at the moving video below as this community in Morocco built the working device in only 3 days. This video is of them turning on the device for the first time. You are seeing just the beginning of this device as more tweaks will be made in the coming days to increase the output power.
Early this morning the QEG Build team here in Morocco successfully got resonance! No hard data to reveal yet but we maintained five 100 Watt Light Bulbs for several minutes.
We will begin to tune the QEG so that we can start increasing the power output. Jamie was surprised that no major tweaking was needed after the first assembly.
We took the day off on Sunday and relaxed after the team spent nearly the whole day on Saturday assembling the QEG. After dinner, Jamie decided to do the prep work for testing her out.
There was a large gathering of people huddled inside the small garage as the work unfolded. It felt like waiting outside a delivery room, when Jamie would announce we are ready for testing everyone would gather to watch. There were so many tablets and cell phones recording the scene that those in the back of the garage had multiple perspectives to watch and see up close.
When we finally pushed her to resonance the first time the entire room began to chant the tone the QEG was making. After the QEG achieved Resonance several Orbs were captured by people taking photos and Hans was able to capture some amazing footage of Orbs on video, which will be uploaded as soon as possible.
Heres a short clip of the Aouchtam team achieving resonance for the first time, job well done!
Read More: http://sitsshow.blogspot.com/2014/04/status-of-qeg-build-morocco-build-day-3.html
http://www.collective-evolution.com/2014/04/30/free-energy-live-in-action-this-is-breathtaking-as-science-is-being-re-written/
![[IMG]](http://www.veteranstoday.com/wp-content/uploads/2014/04/nrol39octopus.png)